Browsing IG System
Washer for Ignition Burner Glow Plug adaptor
The washer for the ignition burner’s glow plug adaptor is used to distribute the load of the threaded fastener.
Product Code: BR42N
Servomex Interconnecting P.C.B 00715907 for Zirconia Sensor Inert Gas System IGS
Printed Circuit Board for Servomex O2 Analyser 790 Series. Used with Servomex Zirconia Sensor (AN10N)
Product Codes: AN09N
Servomex Control Board PCB 00726904A
Printed Circuit Board for Servomex Analyser for Oxygen Analyser. A replaceable control circuit for Servomex Model 790E
Product Codes: AN06N
Parker Lucifer Solenoid Valve 121 K01-481865B2 (24V/60Hz)
¼” Parker 2-way solenoid valve (2/2) used to control the airflow to the ignition burner. for water and neutral liquids with pressure differential.
- Direct Operated
- Brass Pipe Mounting
- Normally Closed
- Pressure Differential
Product Name: Parker Lucifer Solenoid Valve
Type: 121 K01 (24V/60Hz)
Product Codes: SOL02N -SOL11N
SOL10N - 115g
SOL11N - 59g
Mobrey Squing 2 Vibrating Fork Liquid Level Switch for Inert Gas System N2
A popular choice for high and low-level alarm, high-temperature application and pump control/ limit detection duties in Inert Gas & N2 Systems. Applicable for most liquids including coating liquids, aerated liquids, and slurries.
Changes to fork frequency are continuously monitored. The frequency sensor changes depending on the medium it is immersed. The denser the liquid, the lower the frequency.
Product Codes: SW14N
Oil filter for Ignition Pump Burners
This oil filter for the ignition pump filters and heats the oil as it passes through ensuring longer life for the ignition pump.
Product Code: BR32N
Main Burner Nozzle CBM M14/5-55degree
Main Burner Nozzle CBM - multiple variations available.
Ex-Stock Singapore. Purchase now for fast shipping.
Product Code: BR26N
Combustion Chamber's Burner Cone. Inert Gas System IGS
Burner Cone for Combustion Chamber
For Kangrim 4500 m3/hr Combustion Chamber
For Kangrim 3375 m3/hr Combustion Chamber
Product Codes: BR37N, BR38N
Main burner Hose for Fuel Oil 3/8" BSPx1.5mtr SAE 100 R2 AT
Main Burner Hose for Fuel Oil 3/8″ (BSPx1.5mtr SAE 100 R2 AT)
Ex-stock Singapore. Purchase now for fast shipping.
Product Codes: BR24N
Input Module 32 Channel PCB A-42
Input controller board
Product Codes: PLC03N
Ignition Hose for Fuel Oil
Ignition Hose for Fuel Oil 1/4" BSPx1.5mtr
Product Codes: BR22N, Moss Code No.: N9341-001
Ignition Burner Hose Adaptor
Product Codes: BR17
Ignition Burner Nozzle GPH-80degree R
Ignition Burner Nozzle of High Performance and Strong Consistency for IGG and Burner systems. Each nozzle is individually tested for spray conformity, flow rate, spray angle and uniformity.
Product Codes: BR19N, BR20N, BR21N
Ignition Burner Cover Washer (1pc)
The washer for the ignition burner cover which is used to distribute the load of the threaded fastener.
Product Codes: BR15
Glow Plug Beru GH408 12 Volt A.C. Burner Inert Gas System
- Combustion Control
- Pilot burner ignition in inert gas systems
- Parking heater
Product Name: Glow Plug Beru 408 GS
Type: 408 GS 12 Volt A.C.
Product Codes: BR11N or M3586-001 GH-408 (Moss Code No.)
Fuel Oil Pump Star Filter Element
The pleated filter media gives the filter element a large filtration surface on a small diameter. This allows long filtering intervals and the use of fine filter meshes with low-pressure losses.
Filter Media: Stainless Steel Wire Mesh
Cleaning / Replacement: Manual Cleaning
Product Code: BR31N
Flame Guard Sensor Unit (New Type) for Burners
Burner Flame Scanner for sensing of flame in combustion chamber of IG Generator
Product Codes: BR02N